Yamaha DSP-AX861SE owner manual Using the sleep timer, 41 En, Audio information, Video information

■Audio information

FORMAT	Signal format. When this unit cannot detect a
	digital signal, it automatically switches to
	analog input.
SAMPLING	The number of samples per second taken from
	a continuous signal to make a discrete signal.
CHANNEL	The number of source channels in the input
	signal (front/surround/LFE). For example, a
	multi-channel soundtrack with 3 front
	channels, 2 surround channels and LFE, is
	displayed as “3/2/0.1”.
BITRATE	The number of bits passing a given point per
	second.
FLAG	Flag data encoded in DTS, Dolby Digital, or
	PCM signals that cue this unit to automatically
	switch decoders.

Note

“---” appears when this unit cannot display the corresponding information.

■Video information

HDMI SIGNAL	Type of the source video signals and the
	video signals output at the HDMI OUT
	jack of this unit.
HDMI RES.	Resolution of the input signal (analog or
	HDMI) and the output signal (HDMI).
	When input video signals are composite
	video or S-video signals, the input video
	signals are indicated as “Composite” or
	“S-Video”.
HDMI ERROR	Error message for HDMI sources or
	connected HDMI devices. See page 96
	for details.

Playback

Set the operator mode to LAMP and then press

SSLEEP repeatedly to set the amount of time.

Each time you press SSLEEP, the front panel display changes as shown below.

SLEEP 120min	SLEEP 90min
SLEEP OFF SLEEP 30min	SLEEP 60min

The SLEEP indicator flashes while you are switching the amount of time for the sleep timer. Once the sleep timer is set, the SLEEP indicator lights up in the front panel display, and the display returns to the selected sound field program.

Flashes

SLEEP

Lights up

SLEEP

■Canceling the sleep timer

Press SSLEEP on the remote control repeatedly until “SLEEP OFF” appears in the front panel display.

Disappears

OPERATION BASIC

Note

“---” appears when this unit cannot display the corresponding information.

Using the sleep timer

Use this feature to automatically set this unit to the standby mode after a certain amount of time. The sleep timer is useful when you are going to sleep while this unit is playing or recording a source. The sleep timer also automatically turns off any external components connected to AC OUTLET (see page 24).

Note

Even if this unit is in the standby mode, this unit does not cut off the power to AC OUTLET while charging connected iPod (see page 23).

The SLEEP indicator turns off, and “SLEEP OFF” disappears from the front panel display after a few seconds.

y

The sleep timer setting can also be canceled by pressing

HSTANDBY (or 1STANDBY/ON) to set this unit to the standby mode.

English

41 En