Selecting audio input jacks
(AUDIO SELECT)
This unit comes with a variety of input jacks. Use this feature (audio input jack select) to switch between input jacks when more than one input jack is assigned to the same input source.
y
•We recommend that you set the audio input jack select to “AUTO” in most cases.
•You can adjust the default audio input jack select of this unit by using “AUDIO SELECT” in “OPTION MENU” (see page 75).
Press 9AUDIO SELECT (or OAUDIO)
repeatedly to select the desired audio input jack select setting.
Available input sources
Playback
Displaying the current status of this unit on a video monitor
You can display the operating information of this unit on a video monitor.
1Turn on the video monitor connected to this unit.
2Set the operation mode selector to LAMP and then press RDISPLAY on the remote
control.
The current status screen appears in the OSD.
STATUS
|
|
|
|
|
|
|
| VCR DVR | PHONO | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Currently selected audio input jack select setting
AUTO | Automatically selects input signals in the |
| following order: (1) HDMI (2) Digital |
| signals (3) Analog signals. |
|
|
HDMI | Selects only HDMI signals. When HDMI |
| signals are not input, no sound is output. |
|
|
COAX/OPT | Automatically selects input signals in the |
| following order: (1) Digital signals input |
| at the COAXIAL jack. (2) Digital signals |
| input at the OPTICAL jack. When no |
| signals are input, no sound is output. |
|
|
ANALOG | Selects only analog signals. If no analog |
| signals are input, no sound is output. |
|
|
y
You can select the amount of time that the current status is displayed in the OSD by using the
Note
The OSD signal is not output at the VIDEO output jacks and will not be recorded.
OPERATION | BASIC |
Note
This feature is not available when no digital input jacks (OPTICAL, COAXIAL and HDMI) are assigned. Use “I/O ASSIGNMENT” in “INPUT MENU” to reassign the respective input jack (see page 70).
English
