Yamaha DSP5D, PM5D-RH V2 Connecting the PM5D with a DME series unit

MIDI REMOTE function

200 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section

CMONITOR

When you click the monitor source select button (@),

the MONITOR POINT SELECT window will appear,

allowing you to select the monitor source for the DME

series. When you turn the MONITOR button on, the

EXTERNAL CUE indicator in the upper part of the

display will turn on, and the monitor signal of the

DME series will be sent to the PM5D’s CUE bus.

Note

If you want to turn the MONITOR button on, you must first

select the same port for the DME series’ monitor output and

the PM5D monitor input. The monitor output of the DME

series unit can be specified in the “Monitor Out” dialog box

accessed from DME Designer via the [Tools] menu

→

[Moni-

tor]. The monitor input of the PM5D unit is specified by

MONITOR PORT in the SETUP area of the DME CONTROL

screen.

DSCENE

This area indicates/selects the scene that will be stored/

recalled on the DME series unit. When you click the /

buttons located at left and right to select a number,

the name of that scene is shown in the field at right.

ESTORE/RECALL

These buttons save (overwrite) the settings of the DME

series unit edited in the PM5D’s screen into the scene

selected in the SCENE area, or recall the scene selected

in the SCENE area into the DME.

Note

•When storing a DME scene from the PM5D’s screen, you

can only store by overwriting an existing scene on the DME;

you cannot store the settings as a new scene or edit the

scene name.

•If SETUP is selected, items

, and

are not shown.

FParameter display area

This area displays the parameters of the currently

selected component. The displayed contents will

depend on the component.

GASSIGN TO FADERS (DCA fader

assignments)

You can use DCA faders 1–8 to control the parameters

of the component currently shown in the screen.

Note

The parameters that can be assigned to DCA faders will

depend on the component. This function may not be available

for some components.

❏Connecting the PM5D with a DME series unit

Various methods for connecting the PM5D with a DME

series unit to transmit and receive audio signals and con-

trol signals are shown below.

Note

If characters other than alphabetical characters and symbols

(e.g., double-byte characters such as Japanese) are used on

the DME series unit in a component name or scene name,

such characters may not be displayed correctly.

1Bi-directional connection via CobraNet

This connection method uses CobraNet (a format for

transmitting multi-channel audio signals and control sig-

nals over Ethernet). Install a MY-16CII CobraNet card in

the PM5D’s slot, and use an Ethernet cable to connect it to

the DME series. This method allows bi-directional transfer

of audio signals over a single cable. For example, signals

can be sent via the PM5D’s MIX bus to the DME for pro-

cessing, and then returned to a PM5D input channel.

Note

You cannot use AuviTran’s AVY16-ES EtherSound card to

control the DME series from the PM5D.

2Bi-directional connection using the CASCADE IN/

OUT connectors (DME64N only)

In this connection method, the CASCADE IN connector

and CASCADE OUT connector of the PM5D and the

DME64N are connected to each other, allowing bi-direc-

tional transfer of audio signals.

PM5D

CobraNet

connector

DME series

CobraNet

card

Slot

DME64N

PM5D

CASCADE

OUT connector

CASCADE

OUT connector

CASCADE

IN connector

CASCADE

IN connector