Yamaha DSP5D, PM5D-RH V2

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section 235

Information shown

in the display

Function

Global

functions

Output

functions

Input

functions

Appendices

CTalkback input selection

If you want to use an input jack other than the TALK-

BACK jack for purposes of talkback, you can choose it

here from analog inputs AD IN 1–48. The talkback

input selection is not included in the input patch

library.

DHA (PM5D-RH model only)

Here you can switch phantom power on/off and adjust

the gain for the analog input selected in (3). The

LEVEL volume in the TALKBACK section of the panel

does not affect the talkback input from the analog

input channel. The HA setting is included in the HA

library.

ELevel meter (Analog input level meter)

This level meter indicates the peak level of the signal

being input from the analog input selected in (3).

FON/OFF (Analog input on/off)

This button switches the talkback input selected in (3)

on/off.

GON/OFF (Talkback on/off)

This button switches Talkback on/off. This is linked

with the TALKBACK [ON] key in the TALKBACK sec-

tion of the panel.

HNEVER LATCH

This button selects one of the following as the mode in

which the TALKBACK ON/OFF button and the panel

TALKBACK [ON] key will behave.

• If the NEVER LATCH button is off

Talkback will be switched on/off (Latched operation)

each time you click the ON/OFF button or press the

TALKBACK [ON] key. However if you press and hold

down the TALKBACK [ON] key, talkback will stay on

only while you continue holding down the key; talk-

back will turn off when you release the key (Unlatched

operation).

• If the NEVER LATCH button is on

Talkback will be on only while you click and hold

down the ON/OFF button or press and hold down the

TALKBACK [ON] button; talkback will turn off when

you release the button or key (Unlatched operation).

IBUS ASSIGN

Here you can select the bus(es) or output jack(s) from

which the talkback signal will be sent. (Multiple selec-

tions are allowed.)

MIX 1–24 . . . . . . . . MIX bus 1–24

MATRIX 1–8 . . . . . MATRIX bus 1–8

ST A L/R . . . . . . . . . STEREO A bus L/R channels

ST B L/R . . . . . . . . . STEREO B bus L/R channels

JTALKBACK OUT (Talkback direct output)

This indicates the channel of the output jack / slot that

is selected as the output destination for direct output of

the talkback signal. If more than one output destina-

tion is patched, “...” will be displayed following the

name of the output destination that was found first. If

you want to change the output destination, click the

PATCH button to access the OUTPUT PATCH screen.