Yamaha DSP5D, PM5D-RH V2 INSERT POINT screen

OUTPUT PATCH function
246 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
In this screen you can select the position at which the
insert-in/out of each output channel will be patched. Here
you can also switch insert-in on/off.
AInsert view
When you move the cursor to the insert I/O point
(4), the insert point for that output channel will be
shown graphically.
BOUTPUT CH (Output channel)
This is the number and name of the output channel
you are editing. Two paired channels are indicated by a
heart symbol shown at the left; settings 3–4 will be
linked for these channels. You can click this symbol to
enable/disable pairing.
CON/OFF (Insert on/off)
This button switches insert on/off for each channel.
This is linked for paired channels.
Note
Be aware that if you turn on this button when either insert-in or
insert-out are unpatched, the signal will no longer be output
from the corresponding output channel.
DINSERT I/O (Insert I/O point)
Here you can select one of the following as the insert-
in/out location for each output channel.
ESET ALL
Turns on the corresponding item (insert or the insert
point) for all channels (including channels not cur-
rently shown in the screen).
FCLEAR ALL
Turns insert off for all channels (including channels
not currently shown in the screen).
INSERT POINT screen
INSERT POINT
1
PRE EQ Immediately before the EQ
POST EQ Immediately after the EQ
PRE FADER Immediately before the fader
POST ON Immediately after the [ON] key
2
56
3 4