9 Items in the DCA strip
86 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section
2Click the grid at which the desired channel
(assignment source) intersects the desired link
group (assignment destination).
A “ ” symbol will appear at the corresponding grid.
To cancel the assignment, click the “ ” symbol once
again.
In the case of output channel EQ link groups, MIX
channels and STEREO A/B channels can be assigned
only to groups A–F, and MATRIX channels can be
assigned only to groups G/H. (Unavailable grids are
grayed-out.)
If another channel is already assigned to the assign-
ment-destination group, the EQ and compressor
parameters of the previously-assigned channel will be
copied to the channel that is added later, causing the
settings to be the same.
3If you want to use the [CUE] key of each chan-
nel to assign it to a link group, click the SET BY
CUE button for the corresponding link group
in the screen to turn it on.
While the SET BY CUE button is on, you can use the
channel [CUE] keys to set or cancel link group
assignments.
Note
The SET BY CUE button can be turned on for only one link
group.
When you switch to a different screen, the SET BY CUE but-
ton that was turned on will automatically be defeated.
4When you have finished making link group
assignments, operate the EQ or compressor
parameters of a channel belonging to a link
group.
The EQ or compressor parameters of channels belong-
ing to the same link group will follow your editing.
Hint
Link group settings are saved as part of the scene.
Note
The STEREO LINK button and KEY IN SOURCE settings are
not linked even for channels belonging to the same compres-
sor link group.
SET BY CUE button