Yamaha DSP5D, PM5D-RH V2 Basic operations in the effect screen

14 Effects
114 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section
Basic operations in the effect screen
This section explains how to store or recall effect library data, and how to edit effect parameters.
Note
Data created by versions earlier than PM5D V2.0 can be
loaded into the PM5D V2.0 or the DSP5D. However, you must
move library number 55 to number 56 or later before loading.
On PM5D version 2.0 or later, library number 55 will be
deleted.
Here’s how to recall existing settings from the effect library.
1In the DISPLAY ACCESS section, repeatedly
press the [EFFECT] key to access the EFFECT
PARAM screen.
Note
You cannot change the currently selected effect type in the
EFFECT PARAM screen. To change the effect type, you must
recall (load) a library item that uses the desired effect type.
2Click the / buttons at the left and right of
the box in the left side of the screen to select
the effect module you want to use, and then
click the LIBRARY button.
The EFFECT LIBRARY screen will appear, allowing
you to recall or store settings in the effect library.
Hint
You can also access this screen by repeatedly pressing the
[EFFECT] key. The effect module you are controlling can also
be selected in this screen.
3In the library list at the right of the screen,
click to select the library item you want to
recall
When you click a library item in the library list, that
line will be highlighted and move to the center of the
list. The effect type of the currently selected library item
will be shown above the library list.
4Click the RECALL button.
The selected library item will be loaded into the effect
module you chose.
Hint
You can click the EDIT button in the upper right of the screen
to access the EFFECT PARAM screen for the currently
selected effect.
Recalling settings from the effect
library
EFFECT PARAM
The effect module you are controlling
LIBRARY button
EFFECT LIBRARY RECALL button
Library listCurrent effect type