Yamaha DSP5D, PM5D-RH V2 GATE LIBRARY screen

INPUT GATE/COMP function
294 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section
Here you can recall, store, rename, or delete items in the
gate library.
AEDIT
When you click this button, the GATE PARAM screen
for the currently selected input channel will appear.
BChannel selection
Select the input channel that you want to edit. The
name of the channel is displayed at the right.
CGate graph of the selected channel
This graph shows the approximate response of the gate
for the currently selected channel.
DLevel meters
These meters show the amount of gain reduction (GR),
and the peak levels before the gate (PRE) and after the
gate (POST). If the signal clips, the OVER segment will
light.
ERECALL
Recalls the gate library item selected in the list into
memory.
FSTORE
Stores the gate settings of the currently selected chan-
nel into the location selected in the list. When you click
this button a window will appear, allowing you to
name and save the settings.
GTITLE EDIT
Edits the title of the library item selected in the list.
When you click this button a window will appear,
allowing you to edit the title.
HCLEAR
Deletes the library item selected in the list. When you
click this button, a confirmation message will appear.
Note
Library items with an “R” displayed in the right column of the
list are read-only. Read-only items cannot be stored,
renamed, or deleted.
ILibrary gate graph
This graph indicates the approximate response of the
gate library item selected in the list.
JLibrary list
Use the scroll bar to select the library item on which
you want to perform an operation. The selected library
item will move to the center, and will be highlighted.
GATE LIBRARY screen
GATE LIBRARY
1
2
3
4
5
6
7
8
J
9