Yamaha DSP5D, PM5D-RH V2 ELevel meters, FType, 6 97 8, GSTEREO LINK, Key-in signal flow when Link= On, Key-in signal flow when Link= Off, HCompressor graph, IKEY IN SOURCE

OUTPUT COMP function

254 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section

ELevel meters

These meters indicate the amount of gain reduction

(GR), the peak level before (PRE) and after (POST) the

compressor, and the peak level of the key-in signal

(KEY IN) that causes the compressor to operate. If the

signal clips, the OVER segment will light.

If stereo link is turned on for the corresponding MIX

channel or MATRIX channel (or if a STEREO A/B

channel is selected), level meters for two channels are

displayed.

Hint

If GR METER ON/OFF LINK is turned on in the PREFER-

ENCE 1 screen (UTILITY function), the gain reduction meter

will not be displayed when the compressor is off.

FType

Indicates the type of the currently selected compressor.

Hint

To change the compressor type, use the OUTPUT COMP

LIBRARY screen to recall a library item that has a different

type. You cannot change the compressor type in this screen.

GSTEREO LINK

This specifies whether parameter settings and compres-

sor operation by a key-in signal will be linked

(STEREO LINK button on) for adjacent odd-num-

bered/even-numbered MIX/MATRIX channels or the

L/R channels of the STEREO A/B channels, or not

(STEREO LINK button off).

❏ Key-in signal flow when Link= On❏ Key-in signal flow when Link= Off

Note

Stereo Link is fixed at On for paired channels and for STE-

REO A/B channels.

HCompressor graph

This graph displays the approximate response of the

compressor.

IKEY IN SOURCE

Select the desired key-in signal from the following

choices.

6 97 8

SELF PRE EQ The pre-EQ signal of the currently

selected output channel

SELF POST EQ The post-EQ signal of the currently

selected output channel

MIX1–24 POST EQ The post-EQ signal of the corre-

sponding output channel (however,

you can only select from the group

to which that channel belongs,

from the three groups MIX 1–12,

MIX 13–24, and MATRIX/ST)

MATRIX1–8 POST EQ

ST AL/AR POST EQ

ST BL/BR POST EQ

MIX21–24

The output signal of the corre-

sponding MIX channel immedi-

ately before the output patch

THR

LINK= ON

Key-in signal of odd-

numbered channel

Key-in signal of even-

numbered channel

ATTACK

processing

ATTACK

processing

Detect the

maximum

level

THR

LINK= OFF

Key-in signal of odd-

numbered channel

Key-in signal of even-

numbered channel

ATTACK

processing

ATTACK

processing

Detect the

maximum level

Detect the

maximum level