Yamaha DSP5D, PM5D-RH V2 1, 2, 3, 1, 2, 3

PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section 115
14
Effects
Here’s how to edit the parameters of an internal effect.
1In the DISPLAY ACCESS section, repeatedly
press the [EFFECT] key to access the EFFECT
PARAM screen.
The lower part of the screen will show knobs and but-
tons for editing the parameters of the currently selected
effect. The content of the parameters will depend on
the type of the currently selected effect.
2Use the box in the upper left of the screen to
select the effect module you want to control.
3Use the knobs and buttons in the lower part of
the screen to edit the effect parameters.
For details on the effect parameters, refer to the Appen-
dices at the end of this manual.
Hint
The parameter settings for internal effect modules 1–8 are
saved in the scene. The settings of individual effects can also
be stored in the effect library independently of scene memory.
Here’s how to store effect parameter settings in the effect
library.
1In the DISPLAY ACCESS section, repeatedly
press the [EFFECT] key to access the EFFECT
PARAM screen.
2Use the box in the upper left of the screen to
select the effect module whose settings you
want to store, and click the LIBRARY button.
The EFFECT LIBRARY screen will appear, allowing
you to recall or store settings in the effect library.
3In the library list, choose the store-destination
number and click that line.
Note
Library items for which an “R” (read-only) appears in the right
column of the list are factory preset library items. These num-
bers cannot be overwritten.
Editing the effect parameters
EFFECT PARAM
The effect module you are controlling
Effect parameters
Storing settings in the effect library
EFFECT PARAM
The effect module whose data you want to store
LIBRARY button
EFFECT LIBRARY
“R” (read-only)