Yamaha DSP5D, PM5D-RH V2 UTILITY function

UTILITY function

210 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section

Note

During PREVIEW mode, the following USER DEFINE functions that affect internal signal processing are disabled;

EVENT LIST, TALKBACK ASSIGN, MONITOR, MIDI DIRECT OUT, MACHINE CONTROL, and GPI OUT CONTROL.

SET NOMINAL

LEVEL ——

If you hold down this key and press the [SEL] key, the fader

of that channel will be set to nominal level. (While you hold

down this key, only the [SEL] keys of channels not at nominal

level will light.) Alternatively, you can set the level to nominal

level by moving the cursor to an on-screen knob (level, EQ

gain) or fader, and then pressing the [ENTER] key while

holding down this key.

SET DEFAULT

VALUE ——

If you move the cursor to an on-screen knob or fader, and

then press the [ENTER] key while holding down this key, the

control will return to its default value

ENCODER MODE

KEY

PAN

—

Same function as the [PAN] key in the top panel ENCODER

MODE section

GAIN/ATT Same function as the [GAIN/ATT] key in the top panel

ENCODER MODE section

ALT LAYER Same function as the [ALT LAYER] key in the top panel

ENCODER MODE section

MIX SEND 1–24 Same function as the MIX SEND SELECT [1]--[24] keys in

the top panel ENCODER MODE section

FADER FLIP — Same function as the [FLIP] key in the top panel FADER

FLIP section

SELECTED CH INSERT ON/OFF — Turns insert on/off for the selected channel

STEREO STRIP

SECTION STEREO A, STEREO B MONITOR, CUE

Select either STEREO A/B channels, Monitor, or Cue as the

function controlled by the STEREO A/B channel strip's STE-

REO fader and [ON] key

Dark: Monitor or CUE is enabled

Lit: STEREO A/B channels are enabled

DSP5D CONTROL

MACHINE SELECT #1(PM5D), #2(DSP5D),

#3(DSP5D)

Select the PM5D or DSP5D (#2 or #3) as the machine that

will be controlled by panel operations (Lit if the speciﬁed

machine is selected)

CH STRIP LAYER DIRECT

#1(PM5D) CH1-24,

#1(PM5D) CH25-48,

#2(DSP5D) CH1-24,

#2(DSP5D) CH25-48,

#3(DSP5D) CH1-24,

#3(DSP5D) CH24-48,

#1(PM5D) STIN1-4,

#1(PM5D) FX RTN1-4,

#2(DSP5D) STIN1-4,

#2(DSP5D) FX RTN1-4,

#3(DSP5D) STIN1-4,

#3(DSP5D) FX RTN1-4

Switch the INPUT channel strip or ST IN/FX RTN channel

strip to a layer of the desired machine (Lit if the speciﬁed

layer is selected)

*1. The corresponding channel will be selected in the DEFINE ﬁeld of the MONITOR screen, and the monitor source will switch to

DEFINE.

*2. The LED will light for User Deﬁned keys for which a screen has been memorized. The column in the right of the list in the USER

DEFINE screen shows the name of the memorized screen.

*3. Layers that can be memorized include the following items.

- The layer selected in the INPUT channel strip (CH 1-24, CH 25-48, MIDI REMOTE)

- The layer selected in the ST IN/FX RTN channel strip (ST IN 1-4, FX RTN 1-4, MIDI REMOTE)

- The layer shown by the DCA channel strip (DCA, A–F, GEQ)

- If the DCA channel strip is controlling GEQ, the GEQ module number and band

- The encoder mode selected by ENCODER MODE (SEND, PAN, HA, ATT, ALT)

- The FADER FLIP status

- The currently selected MIX send

- The mode selected in the MIX section (MIX SEND, MIX MASTER)

- The source selected in the METER section (CH 1-24 ST IN, CH 25-48 ST IN, MIX/MATRIX)

*4. The output por t and MIDI channel can be speciﬁed in the MIDI SETUP screen.

*5. This parameter speciﬁes the PM5D Editor window that you want to control. If the speciﬁed window is closed or inactive, the window

will be opened and made active. If the speciﬁed window is already open and active, the window will be closed.

FUNCTION PARAMETER 1 PARAMETER 2 Explanation