PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section 93
10
Scene memory

Other parameters

ADCA/GEQ/EFFECT
These buttons specify whether DCA groups, GEQ
modules, and internal effects will be excluded from (or
subject to) Recall.
Note
DCA groups provide a WITH NAME button. This button
excludes the DCA group name from the recall operation (or
selects it as the object of recall).
BMUTE MASTER
This button specifies whether the Mute Master key on/
off status will be excluded from (or subject to) Recall.
CMIDI REMOTE (PM5D only)
These buttons specify whether MIDI remote layers A–
D will be excluded from (or subject to) Recall.
DPLUG-IN (PM5D only)
These buttons specify whether the Waves plug-in DSP
cards Y96K installed in slots 1–4 will be excluded from
(or subject to) Recall.
ESET ALL
This button turns on all buttons for parameters 14.
FCLEAR ALL
This button turns off all buttons for parameters 14.
4In the upper left of the screen, switch the
SELECTIVE RECALL ENABLED/DISABLED but-
ton to ENABLED.
When this button is set to ENABLED, the Selective
Recall function will apply to subsequently-stored
scenes.
5Store the current scene.
The settings of the SELECTIVE RECALL screen will be
saved as part of the scene. When you recall this scene,
only the selected channels/parameters will be excluded
from (or subject to) Recall.
Note
If you edit the settings of the SELECTIVE RECALL screen,
you must store that scene in order to make your changes
effective.
Recall Safe and Selective Recall can be used together.
Channels/parameters excluded from recall operations by
either Recall Safe or Selective Recall (or both) will not be
recalled.
5
6
2
3
4
1