10 Scene memory
98 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Operating section
When PASTE MODE = DCA, GEQ, EFFECT
Select DCA groups, GEQ modules, and internal effects.
Hint
In either of these modes, you can click the SET ALL button to
turn on all channels, or click the CLEAR ALL button to turn off
all channels.
4In the DESTINATION SCENE area, select the
paste-destination scene(s).
To select a single scene, click the desired line in the
upper half of the list.
To select multiple consecutive scenes, use the upper
half of the list to click the scene number at which you
want to begin pasting, and use the lower half of the list
to click the scene number at which you want to stop
pasting.
The order in which the scenes are listed can be changed
by clicking one of the buttons at the top of the list; the
button (sort by number), SCENE TITLE button
(sort by scene title), or TIME STAMP button (sort by
the date on which the scene was saved).
5Click the PASTE button.
The selected items of the current scene will be pasted to
the scene(s) in memory.
Note
If the parameter settings differ between the copy-source and
paste-destination, exception handling may be applied when
the data is pasted (
p.188).
Only the parameters selected by PASTE MODE will be
pasted. Note that even if you selected parameters in the
CURRENT SCENE area, they will be excluded from the
paste operation if you switch the PASTE MODE.