MATRIX/ST function
262 PM5D/PM5D-RH V2 / DSP5D Owner’s Manual Reference section

CSET BY CUE (Assign by [CUE] key)

This specifies whether the [CUE] key will be used to
make/cancel compressor link group assignments.
While the compressor link group SET BY CUE button
is on, pressing the [CUE] key of a channel that can be
assigned to the corresponding group will assign the
channel to the group. (Press the [CUE] key once again
to cancel the assignment.)
Hint
The SET BY CUE button can be turned on for only one com-
pressor link group. This is automatically turned off when you
change screens or turn off the power.

DCLEAR

This button clears all output channels assigned to that
compressor link group.
MATRIX/ST function
Here you can send the signal from MIX channels and STE-
REO A/B channels to the STEREO bus or the desired
MATRIX bus.

AMATRIX bus

This is the number of the MATRIX bus to which the
signal is sent. Paired MATRIX channels are indicated
by a heart symbol displayed between them. You can
click this symbol to enable/disable pairing.

BSend level

These knobs specify the send level of each signal that is
sent from the MIX channel or STEREO A/B channel
(vertical column) to the MATRIX buses (horizontal
row).
The knobs shown in this area will depend on how the
MATRIX channels are paired.

43

MATRIX/ST ROUTING screen

MATRIX/ST ROUTING
21
MIX channel
STEREO A/B channel