140
C r e a t i n g O r i g i n a l A c c o m p a n i m e n t P a t t e r n s
V Enter the Required Phrase Number
Use the cursor keys to move to the category, beat, or
number parameter, then use the [-1] and [+1] keys or the SHIFT-
Number entry method to select the desired phrase for that track.
Cursor at D1 track
Move the cursor to the phrase-entry area of the track you
want to assign a phrase to.
■
NOTE
• The default pattern length for the INTRO, MAIN A, MAIN B, and
ENDING sections is 2 measures, while the default length for the FILL
AB and FILLBA sections is 1 measure.
C Select a Pattern Track
Phrases can be assigned to any of 8 “tracks” in the
PATTERN mode. The PATTERN mode tracks and the phrases that
can be assigned to each track are listed below:
Track Part Available Phrases
D1 Drum 1 Drums Phrase
D2 Drum 2 Drums Phrase
PC Percussion Percussion Phrase
BA Bass Bass Phrase
C1 Chord 1
Chord backing phrase (Guitar, Keyboard, etc.)
C2 Chord 2
Chord backing phrase (Guitar, Keyboard, etc.)
C3 Chord 3
Chord backing phrase (Guitar, Keyboard, etc.)
C4 Chord 4
Chord backing phrase (Guitar, Keyboard, etc.)
■
NOTE
• For details on the available phrases, refer to the Preset Phrase List.