167
T h e P a t t e r n J o b s
11
04 : Crescendo
Produces a gradual crescendo (increase in note velocity) or decre-
scendo (decrease in note velocity) in the specified track over the specified
range of measures.
The “TR” parameter selects the track to be affected by the Cre-
scendo job: D1, D2, PC, BA, C1, C2, C3, C4.
The “M” parameters above the graphic bar are used to specify the
first measure:beat and last measure:beat of the range to be modified.
The “Range” parameter determines the range of velocity values
over which the crescendo will occur. A setting of “+24”, for example, will
cause the MIDI velocity values to increase by 24 over the specified mea-
sure range (The MIDI velocity value range is from 1 to 127).
Negative values cause a corresponding decrease in velocity, thereby
producing a decrescendo rather than a crescendo. The range of this
parameter is from “-99” through “0” to “+99”.
Specified measure (“M”) range.
Range +24.
Crescendo.
Original
velocity.
First beat.
First measure. Last measure.
Last beat.