27
3
T h e C o n t r o l s
TRY THIS:
Select the SONG mode display
(use the [SONG] key, as described
above), then press the [MENU]
key. You should see the menu
shown on the right:
Next press the second function key (the one immediately
to the right of “Job” on the menu) to call the SONG mode
Job List:
You can now use the cursor keys
(up and down only) to select the
various items in the Job List.
Leave the display as it is for now,
and read about the [ENTER] key,
below.
!0 [ENTER] Key
In addition to “entering” chords in the SONG and PAT-
TERN modes (which we’ll learn about later), the [ENTER] key is
used to “enter” a selected menu function.
TRY THIS:
Assuming that you’ve gone through the “TRY THIS:”
procedure for the [MENU] and Function keys, above, you
should now have the SONG mode Job List on your QY70
screen. Use the cursor keys (up
and down only) to select job
number 02 “Modify Velocity”.
Now press the [ENTER] key to
actually engage the Modify
Velocity job — the display should
look like this:
Since we don’t really want to use the Modify Velocity job,
press the [EXIT] key twice (or the [SONG] key once) to go
back to the SONG mode.