89
8
P l a y b a c k C o n t r o l
● Selecting a Song
The QY70 can retain up to 20 different songs in memory at
the same time: song numbers 01 through 20 (three demo songs
are recorded as song numbers 21 through 23). To select a song
for playback use the cursor keys to move the cursor to the song
number location (the song number will be highlighted), and then
use the [-1] and [+1] keys or the SHIFT-Number entry method
desribed below to select the desired song number. If the song
has been given a name (this is done via the Song Name job
described on page 136), the song name will appear to the right of
the song number.
The SHIFT-Number Entry Method
Numeric values can be directly entered by using the black
micro-keyboard keys (numbered 1 through 0) while holding
the [SHIFT] key. To enter the number “16”, for example,
press the “1” and then the “6” keys (“F#/Gb” and “7(#9)/
7(b9)” on the micro-keyboard) while holding the [SHIFT]
key. The entered number — “16” — will flash on the
display. Press the [ENTER] key to actually enter the num-
ber.
Negative values can be entered where applicable by first
pressing the “E” (“-”) key on the micro-keyboard while
holding the [SHIFT] key, and then entering the value as
described above.
● Playing the Selected Song
Playback of the selected song is started by pressing the [
W
]
(“PLAY”) sequencer key. The green LED will flash at the playback
tempo. The song will play through to the end and then stop
automatically. Song playback can also be stopped at any time by
pressing the [
A
] sequencer key.
■
NOTE
• When a song is selected, its voice and effect settings will be recalled.
Therefore, you should wait for about 1 second until pressing the [
W
]
button after selecting a song.