A p p e n d i x
15
231
Troubleshooting
If you experience problems such as “no sound,” “incorrect sound,” or “sequencer
does not operate,” please check the following points before deciding that the unit is
malfunctioning. In many cases, checking these points will help you solve the problem.
If this does not solve the problem, contact your nearest Yamaha dealer or the autho-
rized distributor for your country.
Problem
No sound
Possible causes
Is the volume sufficiently raised on the QY70
and/or external sound equipment?
Are the headphones or speakers properly
connected?
Is the Master Volume and/or each track
volumes raised sufficiently?
If the REVERB, CHORUS, VARI, and DRY
settings are all set to 0, the sound for that
track will not be produced.
Is the Fingered Chord function turned ON? If
you play a note within the Fingered Zone, no
sound will be produced.
Is the MUTE setting turned ON?
Is the MIDI IN jack or TO HOST jack properly
connected?
Is the HOST SELECT switch properly set?
Is MIDI local set to OFF?
Have unneeded effects been set?
Does the number of currently sounding notes
exceed the QY70’s maximum polyphony of
32?
Does the selected song/pattern contain data?
Is the MIDI Sync set to external?
Is Style Number 129 (End Pattern) selected in
the Song Mode’s display?
The length of a pattern (number of measures)
cannot be changed, if it includes recorded
user phrases.
Refer to page
The sound is distorted.
Notes are intermittently
broken (notes sputter or
stutter).
Playback does not start when
you press [
W
].
Can’t change the length of a
pattern (number of mea-
sures).
p.14
p.64
p.66
p.43, 227
p.62, 92, 141
p.15, 16
p.17
p.223
p.212
p.229
p.80, 137
p.222
p.35
p.148