3-40
CHK
ADJ
CHECKING ANDLUBRICATING THE CABLES/LUBRICATING THE
LEVERS AND PEDALS LUBRICATING THE SIDE STAND/LUBRICATING
THE CENTERSTAND LUBRICATING THE REAR SUSPENSION
WARNING
NOTE:
EAS00170
CHECKING AND LUBRICATING THE CABLES
The following procedure applies to all of the
cable sheaths and cables.
Damaged cable sheaths may cause the
cable to corrode and interfere with its move-
ment. Replace damaged cable sheaths and
cables as soon as possible.
1. Check:
Scable sheath
Damage Replace.
2. Check:
Scable operation
Unsmooth operation Lubricate.
Recommended lubricant
Engine oil or a suitable cable
lubricant
Hold the cable end upright and pour a few drops
of lubricant into the cable sheath or use a suit-
able lubing device.
EAS00171
LUBRICATING THE LEVERS AND PEDALS
Lubricate the pivoting point and metal-to-metal
moving parts of the levers and pedals.
Recommended lubricant
Engine oil
EAS00172
LUBRICATING THE SIDESTAND
Lubricate the pivoting point and metal-to-metal
moving parts of the sidestand.
Recommended lubricant
Engine oil
EAS00173
LUBRICATING THE CENTERSTAND
Lubricate the pivoting point and metal-to-metal
moving parts of the centerstand.
Recommended lubricant
Engine oil
EAS00174
LUBRICATING THE REAR SUSPENSION
Lubricate the pivoting point and metal-to-metal
moving parts of the rear suspension.
Recommended lubricant
Molydenum disulfide grease