7-40
Check that the fuel level gauge needle move to
“F” to “E”.
Before reading the fuel level gauge, leave the
float in one position (either up or down) for at
least three minutes.
Does the fuel level gauge needle move ap-
propriately?
2. Voltage
Connect the pocket tester (DC 20 V) to the me-
ter assembly coupler (wire harness side) as
shown.
Tester positive probe brown
Tester negative probe black 1
2
YES
The wiring circuit
from the main switch
to the meter assem-
bly coupler is faulty
and must be re-
paired.
NO
Set the main switch to “ON”.
Measure the voltage (12 V).
Is the voltage within specification?
YES
Replace the fuel level
gauge.
NO
NOTE:
3. Fuel level gauge
Set the main switch to “ON”.
Move the float up or down .
This circuit is OK.
1 2
SIGNALING SYSTEM ELEC