6-45
CHAS
FRONT FORK
CAUTION:
NOTE:
CAUTION:
4. Remove:
dust seal 1
oil seal clip 2
(with a flat-head screwdriver)
Do not scratch the inner tube.
5. Remove:
damper rod bolt 1
While holding the damper rod with the damper
rod holder 2 and T-handle 3, loosen the
damper rod bolt.
Damper rod holder (30 mm)
90890-01327
T-Handle
90890-01326
6. Remove:
inner tube
a. Hold the front fork leg horizontally.
b. Securely clamp the brake caliper bracket in a
vise with soft jaws.
c. Separate the inner tube from the outer tube
by pulling the inner tube forcefully but care-
fully.
Excessive force will damage the oil seal
and bushing. A damaged oil seal or bush-
ing must be replaced.
Avoid bottoming the inner tube into the
outer tube during the above procedure, as
the oil flow stopper will be damaged.