4-35
ENG
CLUTCH
NOTE:
NOTE:
NOTE:
EAS00275
REMOVING THE CLUTCH
1. Straighten the lock washer tab.
2. Loosen:
clutch boss nut 1
While holding the clutch boss 2 with the univer-
sal clutch holder, loosen the clutch boss nut.
Universal clutch holder 3
90890-04086
3. Remove:
clutch boss nut 1
lock washer 2
clutch boss 3
thrust washer 4
spacer 5
bearing 6
clutch housing 7
Insert two 6 mm bolts 8 into the spacer and
then remove the spacer by pulling on the bolts.
EAS00280
CHECKING THE FRICTION PLATES
The following procedure applies to all of the fric-
tion plates.
1. Check:
friction plate
Damage/wear Replace the friction plates
as a set.
2. Measure:
friction plate thickness
Out of specification Replace the friction
plates as a set.
Measure the friction plate at four places.
Friction plate thickness
2.9 3.1 mm
<Limit>: 2.8 mm