4-88
ENG
TRANSMISSION
NOTE:
NOTE:
EAS00429
INSTALLING THE TRANSMISSION
1. Install:
main axle assembly 1
drive axle assembly 2
Make sure that the drive axle bearing circlips
3 are inserted into the grooves 4 in the upper
crankcase.
The drive axle bearing pin 5 must face to-
wards the rear of the crankcase and the main
axle bearing pin 6 must face towards the front
of the crankcase.
2. Check:
transmission
Rough movement Repair.
Oil each gear, shaft, and bearing thoroughly.