4-38
ENG
CLUTCH
NOTE:
NOTE:
EAS00288
CHECKING THE CLUTCH PUSH RODS
1. Check:
O-ring 1
short clutch push rod 2
long clutch push rod 3
ball 4
bearing 5
Cracks/damage/wear Replace the de-
fective part(-s).
2. Measure:
long clutch push rod bending limit
Out of specification Replace the long
clutch push rod.
Long clutch push rod bending limit
0.3 mm
INSTALLING THE CLUTCH
1. Install:
clutch housing 1
Engage the notch of clutch housing and the pro-
jection on the oil pump drive gear.
2. Install:
bearing 1
spacer 2
thrust washer 3
Install the spacer with the two screw holes fac-
ing towards the clutch boss.