4-39
ENG
CLUTCH
NOTE:
NOTE:
3. Tighten:
clutch boss nut 1
While holding the clutch boss with the universal
clutch holder 2, tighten the clutch boss nut.
Universal clutch holder
90890-04086
Clutch boss nut
70 Nm (7.0 mkg)
4. Bend the lock washer tab along a flat side of
the nut.
5. Lubricate:
long clutch push rod 1
ball 2
short clutch push rod 3
(with the recommended lubricant)
Recommended lubricant
Lithium soap base grease
6. Install:
clutch spring plate seat 1
clutch spring plate 2
Install the spring plate with the letters “OUT
SIDE” facing outward.