SYMPTOM | DIAGNOSIS | ACTION |
|
|
|
| Media incorrectly loaded or not | Load media correctly. See |
| loaded. | “Media Loading” on page 15. |
|
|
|
Printer stops. PAUSE light | Misadjusted media sensor. | Check position and sensitivity |
Media not calibrated. | of media sensor and/or | |
and PAPER/RIBBON light |
| calibrate media. See “Media |
both ON. |
| and Ribbon Sensor Sensitivity |
|
| Adjustment” on page 63 and |
|
| “Calibration” on page 43. |
|
|
|
Printer stops. PAUSE light ON | Ribbon incorrectly loaded or | Load ribbon correctly. See |
and PAPER/RIBBON light | not loaded. | page 11 for the 105Se and |
FLASHING. |
| page 14 for the 160S. |
|
|
|
| Malfunctioning ribbon sensor. | Call a service technician. |
|
|
|
Printer stops. PAUSE light ON | Printhead is not fully closed. | Close printhead completely. |
and PRINTHEAD light |
|
|
Printhead open sensor not | Call a service technician. | |
FLASHING. | detecting its position flag. |
|
|
|
|
| Printhead element is | Printer resumes printing when |
| overheated. | the printhead element cools. If |
|
| condition persists, move |
|
| printer to a cooler |
Printer stops. PAUSE light |
| environment. |
and PRINTHEAD light both |
|
|
Power supply is overheated. | Printer resumes printing when | |
ON. |
| the power supply cools. If |
|
| condition persists, move |
|
| printer to a cooler |
|
| environment. |
|
|
|
Dots missing in printed area of | Printhead element going bad. | Call a service technician. |
label. |
|
|
|
|
|
66 | Zebra |
