Zebra Technologies 105Se manual Ï‹Ÿ›Æ, 3HHO2II, XWWHU0RGXOH, 0HGLD5HZLQG

%®Ï‹Ÿ›Æ

3HHO￿2II

Your printer may be equipped with the peel-off option. In the peel-off mode, only the label backing rewinds onto the rewind spindle. The peel/tear bar separates the label from the backing and the label available sensor activates the PAUSE mode to allow the operator to remove a printed label before subsequent labels print.

This option cannot be added to a printer equipped with the optional Cutter.

&XWWHU￿0RGXOH

Your printer may be factory equipped with a cutter module that cuts labels after they have been printed. In addition, an optional cutter catch tray can be added to gather the labels once they have been cut.

0HGLD￿5HZLQG

Your printer may be equipped with a media rewind option. This option supports both the rewind and peel-off modes of operation.

In rewind mode, both labels and backing material rewind internally onto a user-supplied 3" core. A rewind bracket guides the media back to the rewind spindle after printing.

This option cannot be added to a printer equipped with the optional Cutter.

(See Peel-Off Option above for peel-off mode of operation.)

Zebra S-Series User’s Guide 79