Zebra Technologies 105Se manual For printers with the cutter

SYMPTOM	DIAGNOSIS	ACTION
	Cutter is dirty.	Follow cutter module cleaning
Labels are jamming in cutter,		procedure on page 57.
or labels are being cut more
	Label length is too short.	Increase label length.
than once.
	Media jammed in cutter.	Remove media, clean cutter
		module (see page 57).
For printers with the cutter
	Connecting cable not	Plug cable into cutter module.
option installed: printing	connected to cutter module.
stops. PAPER/RIBBON,
	Cutter module is dirty.	Clean cutter module (see
PAUSE, and CANCEL LEDs
		page 57).
on.
	End of the media is not	Reposition media so that the
	positioned correctly on top of	end is on top of the platen.
	the platen.

70 Zebra S-Series User’s Guide