Zebra Technologies 105Se manual 5HPRYLQJ8VHG5LEERQ6H

Figure 8

5HPRYLQJ￿8VHG￿5LEERQ￿￿￿￿￿6H￿

To remove used ribbon, refer to Figure 9 and follow the steps below.

1.Pull the hook out slightly, then rotate the hook back-and-forth several times as shown and remove it from the spindle.

2.Grasp the used ribbon and remove it from the ribbon take-up spindle.

3.Remove the empty core from the ribbon supply spindle.

4.Follow the ribbon loading procedure on page 11 to load the new ribbon.

Figure 9

Zebra S-Series User’s Guide 19