Operations
Load Media in Rewind Mode
62
P1009874-003 Xi4™/RXi4™ User Guide 4/30/13
13. Extend approximately 36 in. (920 mm) of media ou t of the printer. Remove and discard
the labels from this exposed media.
14. Remove the hook from the rewind spindle.
15. If you are using a core, slide it onto the rewind spindle until it is flush against the guide
plate.
16. Wind the media liner coun terclockwise around the rewind spindle.
17. Reinstall the hook. Insert the short end of the hook into the hole in the center of the
adjusting nut (1). Insert the long end of the hook int o the small hole o n the guid e plate ( 2).
Note • A core is not required.