Zebra Technologies 11380100000, 11380100200 manual Remove Media Liner from the Rewind Spindle, Yes

Operations

Load Media in Rewind Mode

Remove Media Liner from the Rewind Spindle

Rewind mode uses the rewind spindle to wind media, while Peel-Off mode uses the rewind spindle to wind used liner. Remove the media or the liner from the rewind spindle each time that you change media.

Important • It is not necessary to turn off the power to remove media or liner from the rewind spindle. If power is turned off, all label formats and images, as well as any temporarily saved parameter settings stored in the printer’s internal memory, are lost. When power is turned back on, these items must be reloaded.

To remove media or liner from the rewind spindle, complete these steps:

1.Has the media run out?

If...	Then...
No	a. Create slack in the media or liner by rotating the rewind spindle
	slightly clockwise.

b.Cut or tear the media or liner at the rewind spindle.

Yes Continue with the next step.

65

4/30/13 Xi4™/RXi4™ User Guide P1009874-003