ZyWALL 2 and ZyWALL 2WE

Table 10-1 Fields in Menu 11.1

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Service Type

Press [SPACE BAR] and then [ENTER] to select from Standard,

Standard

 

RR-Toshiba(RoadRunner Toshiba authentication method) or RR-

 

 

Manager (RoadRunner Manager authentication method). Choose

 

 

one of the RoadRunner methods if your ISP is Time Warner's

 

 

RoadRunner; otherwise choose Standard.

 

Service Name

If you are using PPPoE encapsulation, then type the name of your

poellc

 

PPPoE service here. Only valid with PPPoE encapsulation.

 

Outgoing

 

 

My Login

This field is applicable for PPPoE encapsulation only. Enter the

jim

 

login name assigned by your ISP when the ZyWALL calls this

 

 

remote node. Some ISPs append this field to the Service Name

 

 

field above (e.g., jim@poellc) to access the PPPoE server.

 

My Password

Enter the password assigned by your ISP when the ZyWALL calls

*****

 

this remote node. Valid for PPPoE encapsulation only.

 

Retype to

Type your password again to make sure that you have entered it

*****

Confirm

correctly.

 

 

 

 

Server IP

This field is valid only when RoadRunner is selected in the Service

 

 

Type field. The ZyWALL will find the RoadRunner Server IP

 

 

automatically if this field is left blank. If it does not, then you must

 

 

enter the authentication server IP address here.

 

Route

This field refers to the protocol that will be routed by your ZyWALL –

IP

 

IP is the only option for the ZyWALL.

 

 

 

 

Edit IP

This field leads to a “hidden” menu. Press [SPACE BAR] to select

No

 

Yes and press [ENTER] to go to Menu 11.3 - Remote Node

(default)

 

Network Layer Options.

 

Session Options

This field leads to another “hidden” menu. Use [SPACE BAR] to

No

Edit Filter sets

select Yes and press [ENTER] to open menu 11.5 to edit the filter

(default)

sets. See the Remote Node Filter section for more details.

 

 

 

 

 

 

Once you have configured this menu, press [ENTER] at the message “Press ENTER to Confirm...” to save your configuration, or press [ESC] at any time to cancel.

10.3.2 PPPoE Encapsulation

The ZyWALL supports PPPoE (Point-to-Point Protocol over Ethernet). You can only use PPPoE encapsulation when you’re using the ZyWALL with a DSL modem as the WAN device. If you change the

Remote Node Setup

10-3