ZyWALL 2 and ZyWALL 2WE

Chapter 23

System Maintenance & Information

This chapter leads you through SMT menus 24.8 to 24.10.

23.1 Command Interpreter Mode

The Command Interpreter (CI) is a part of the main router firmware. The CI provides much of the same functionality as the SMT, while adding some low-level setup and diagnostic functions. Enter the CI from the SMT by selecting menu 24.8. Access can be by Telnet or by a serial connection to the console port, although some commands are only available with a serial connection. See the included disk or zyxel.com for more detailed information on CI commands. Enter 8 from Menu 24 - System Maintenance. Type exit to return to the SMT main menu when finished.

Use of undocumented commands or misconfiguration can damage the unit andpossibly render it unusable.

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Firmware Update

8.Command Interpreter Mode

9.Call Control

10.Time and Date Setting

11.Remote Management Setup

Enter Menu Selection Number:

Figure 23-1 Command Mode in Menu 24

System Maintenance & Information

23-1