ZyWALL 2 and ZyWALL 2WE

23.3 Time and Date Setting

The ZyWALL has a software mechanism to set the time manually or get the current time and date from an external server when you turn on your ZyWALL. Menu 24.10 allows you to update the time and date settings of your ZyWALL. The real time is then displayed in the ZyWALL error logs and firewall logs.

Select menu 24 in the main menu to open Menu 24 - System Maintenance, as shown next.

Menu 24 - System Maintenance

1.System Status

2.System Information and Console Port Speed

3.Log and Trace

4.Diagnostic

5.Backup Configuration

6.Restore Configuration

7.Upload Firmware

8.Command Interpreter Mode

9.Call Control

10.Time and Date Setting

11.Remote Management Setup

Enter Menu Selection Number:

Figure 23-6 Menu 24: System Maintenance

Enter 10 to go to Menu 24.10 - System Maintenance - Time and Date Setting to update the time and date settings of your ZyWALL as shown in the following screen.

Menu 24.10 - System Maintenance - Time and Date Setting

Use Time Server when Bootup= NTP (RFC-1305)

Time Server Address= tick.stdtime.gov.tw

Current Time:

00

: 00

: 00

New Time (hh:mm:ss):

11

: 23

: 16

Current Date:

2000

- 01

- 01

New Date (yyyy-mm-dd):

2001

- 03

- 01

Time Zone= GMT+0800

 

 

 

 

 

Daylight Saving= No

 

 

 

01

– 01

Start Date (mm-dd):

 

 

 

End Date (mm_dd):

 

 

 

01

– 01

Press ENTER to Confirm or ESC to Cancel:

Figure 23-7 Menu 24.10 System Maintenance: Time and Date Setting

System Maintenance & Information

23-5