ZyWALL 2 and ZyWALL 2WE
Chart
LOG CATEGORIES | AVAILABLE PARAMETERS |
|
|
attack | 0, 1, 2, 3 |
error | 0, 1, 2, 3 |
ike | 0, 1, 2, 3 |
ipsec | 0, 1, 2, 3 |
javablocked | 0, 1, 2, 3 |
mten | 0, 1 |
upnp | 0, 1 |
urlblocked | 0, 1, 2, 3 |
urlforward | 0, 1 |
Use 0 to not record logs for that category, 1 to record only logs for that category, 2 to record only alerts for that category, and 3 to record both logs and alerts for that category.
Use the sys logs save command to store the settings in the ZyWALL (you must do this in order to record logs).
Displaying Logs
Use the sys logs display command to show all of the logs in the ZyWALL’s log.
Use the sys logs category display command to show the log settings for all of the log categories.
Use the sys logs display [log category] command to show the logs in an individual ZyWALL log category.
Use the sys logs clear command to erase all of the ZyWALL’s logs.
Log Command Example
This example shows how to set the ZyWALL to record the access logs and alerts and then view the results.
ras> sys logs load
ras> sys logs category access 3 ras> sys logs save
ras> sys logs display access
86 | Log Descriptions |