ZyWALL 2 and ZyWALL 2WE

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= Full Feature

Metric= N/A

Private= N/A

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Press Space Bar to Toggle.

Figure 12-4 Menu 11.3: Applying NAT to the Remote Node

The following table describes the options for Network Address Translation.

Table 12-3 Applying NAT in Menus 4 & 11.3

FIELD

DESCRIPTION

OPTIONS

 

 

 

Network

When you select this option the SMT will use Address Mapping Set 1

Full Feature

Address

(menu 15.1 - see section 12.3.1 for further discussion). You can

 

Translation

configure any of the mapping types described in Table 12-2. Choose

 

 

Full Feature if you have multiple public WAN IP addresses for your

 

 

ZyWALL.

 

 

 

 

 

NAT is disabled when you select this option.

None

 

 

 

 

When you select this option the SMT will use Address Mapping Set

SUA Only

 

255 (menu 15.1 - see section 12.3.1). Choose SUA Only if you have

 

 

just one public WAN IP address for your ZyWALL.

 

12.3 NAT Setup

Use the address mapping sets menus and submenus to create the mapping table used to assign global addresses to computers on the LAN. You can see two NAT address mapping sets in menu 15.1. You can only configure Set 1. Set 255 is used for SUA. When you select Full Feature in menu 4 or 11.3, the SMT

12-8

NAT