ZyWALL 2 and ZyWALL 2WE

Chapter 9

Internet Access

This chapter shows you how to configure your ZyWALL for Internet access.

9.1Introduction to Internet Access Setup

Use information from your ISP along with the instructions in this chapter to set up your ZyWALL to access the Internet. There are three different menu 4 screens depending on whether you chose Ethernet, PPTP or PPPoE Encapsulation. Contact your ISP to determine what encapsulation type you should use.

9.2Ethernet Encapsulation

If you choose Ethernet in menu 4 you will see the next screen.

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Encapsulation= Ethernet

Service Type= Standard

My Login= N/A

My Password= N/A

Login Server IP= N/A

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation= SUA Only

Press ENTER to Confirm or ESC to Cancel:

Figure 9-1 Menu 4: Internet Access Setup (Ethernet)

The following table describes this screen.

 

Table 9-1 Menu 4: Internet Access Setup Menu Fields

FIELD

DESCRIPTION

 

 

ISP’s Name

Enter the name of your Internet Service Provider, e.g., myISP. This information is

 

for identification purposes only.

Internet Access

9-1