ZyWALL 2 and ZyWALL 2WE

Table 25-1Schedule Set Setup Fields

FIELD

DESCRIPTION

OPTIONS

 

 

 

How

Should this schedule set recur weekly or be used just once only? Press

Once

Often

[SPACE BAR] and then [ENTER] to select Once or Weekly. Both these

Weekly

 

options are mutually exclusive. If Once is selected, then all weekday

 

 

 

settings are N/A. When Once is selected, the schedule rule deletes

 

 

automatically after the scheduled time elapses.

 

Once:

If you selected Once in the How Often field above, then enter the date the

 

Date

set should activate here in year-month-date format.

 

 

 

 

 

 

Weekday:

If you selected Weekly in the How Often field above, then select the

Yes

Day

day(s) when the set should activate (and recur) by going to that day(s) and

No

pressing [SPACE BAR] to select Yes, then press [ENTER].

 

N/A

 

 

 

 

 

Start

Enter the start time when you wish the schedule set to take effect in hour-

 

Time

minute format.

 

 

 

 

Duration

Enter the maximum length of time this connection is allowed in hour-minute

 

 

format.

 

 

 

 

Action

Forced On means that the connection is maintained whether or not there

Forced On

 

is a demand call on the line and will persist for the time period specified in

Forced

 

the Duration field.

 

Down

 

Forced Down means that the connection is blocked whether or not there is

 

Enable Dial-

 

a demand call on the line.

 

On-Demand

 

Enable Dial-On-Demandmeans that this schedule permits a demand call

 

Disable

 

on the line.

 

Dial-On-

 

 

 

Disable Dial-On-Demandmeans that this schedule prevents a demand

Demand

 

call on the line.

 

 

 

 

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your configuration, or press [ESC] at any time to cancel.

25.3 Applying Schedule Sets

Once your schedule sets are configured, you must then apply them to the desired remote node(s). Enter 11 from the Main Menu and then enter the target remote node index. Press [SPACE BAR] and then [ENTER] to select PPPoE in the Encapsulation field to make the schedule sets field available as shown next.

Call Scheduling

25-3