ZyWALL 2 and ZyWALL 2WE
Follow the instructions in the next table on how to configure the DHCP fields.
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
DHCP | This field enables/disables the DHCP server. | Server |
| If set to Server, your ZyWALL will act as a DHCP server. |
|
| If set to None, the DHCP server will be disabled. |
|
| If set to Relay, the ZyWALL acts as a surrogate DHCP server and |
|
| relays requests and responses between the remote server and the |
|
| clients. |
|
| When set to Server, the following items need to be set: |
|
|
|
|
Configuration: |
|
|
|
|
|
Client IP Pool | This field specifies the first of the contiguous addresses in the IP | 192.168.1.33 |
Starting | address pool. |
|
Address |
|
|
|
|
|
Size of Client | This field specifies the size, or count of the IP address pool. | 32 |
IP Pool |
|
|
|
|
|
Primary DNS | Type the IP addresses of the DNS servers. The DNS servers are |
|
Server | passed to the DHCP clients along with the IP address and the subnet |
|
Secondary | mask. |
|
|
| |
DNS Server |
|
|
|
|
|
DHCP Server | If Relay is selected in the DHCP field above, then type the IP address |
|
Address | of the actual, remote DHCP server here. |
|
Follow the instructions in the following table to configure TCP/IP parameters for the LAN port.
TableFIELD | DESCRIPTION | EXAMPLE |
|
|
|
TCP/IP Setup: |
|
|
|
|
|
IP Address | Enter the IP address of your ZyWALL in dotted decimal notation | 192.168.1.1 |
|
| (default) |
|
|
|
IP Subnet Mask | Your ZyWALL will automatically calculate the subnet mask based | 255.255.255.0 |
| on the IP address that you assign. Unless you are implementing |
|
| subnetting, use the subnet mask computed by the ZyWALL. |
|
|
|
|
RIP Direction | Press [SPACE BAR] and then [ENTER] to select the RIP direction. | Both |
| Options are: Both, In Only, Out Only or None. | (default) |
|
| |
|
|
|
LAN Setup |