ZyXEL Communications 2WE 10.3.3 PPTP Encapsulation, PPTP, Table 10-3Fields in Menu 11.1 (PPTP Encapsulation), Table 10-2Fields in Menu 11.1 (PPPoE Encapsulation Specific)

ZyWALL 2 and ZyWALL 2WE

Table 10-2 Fields in Menu 11.1 (PPPoE Encapsulation Specific)

FIELD	DESCRIPTION	EXAMPLE
Session	Type the length of idle time (when there is no traffic from the ZyWALL to	100
Options	the remote node) in seconds that can elapse before the ZyWALL	seconds
Idle Timeout	automatically disconnects the PPPoE connection. This option only	(default)
	applies when the ZyWALL initiates the call.

10.3.3 PPTP Encapsulation

If you change the Encapsulation to PPTP in menu 11.1, then you will see the next screen. Please see the appendices for information on PPTP.

Menu 11.1 - Remote Node Profile

Rem Node Name= ChangeMe	Route= IP
Active= Yes
Encapsulation= PPTP	Edit IP= No
Service Type= Standard	Telco Option:
Service Name=N/A	Allocated Budget(min)= 0
Outgoing=	Period(hr)= 0
My Login=	Schedules=
My Password= ********	Nailed-up Connections=
Authen= CHAP/PAP	Session Options:
PPTP :
	Edit Filter Sets= No
My IP Addr=	Idle Timeout(sec)= 100
My IP Mask=
Server IP Addr=	Edit Traffic Redirect= No
Connection ID/Name=

Press ENTER to Confirm or ESC to Cancel:

Press Space Bar to Toggle.

Figure 10-4 Menu 11.1: Remote Node Profile for PPTP Encapsulation

The next table shows how to configure fields in menu 11.1 not previously discussed above.

Table 10-3 Fields in Menu 11.1 (PPTP Encapsulation)

FIELD	DESCRIPTION	EXAMPLE
Encapsulation	Press [SPACE BAR] and then [ENTER] to select PPTP. You must	PPTP
	also go to menu 11.3 to check the IP Address setting once you
	have selected the encapsulation method.

10-6 Remote Node Setup