ZyWALL 2 and ZyWALL 2WE

LAN only,

Neither (Disable).

When you Choose WAN only or ALL (LAN & WAN), you still need to configure afirewall rule to allow access.

To disable remote management of a service, select Disable in the corresponding Server Access field.

Enter 11 from menu 24 to bring up Menu 24.11 – Remote Management Control.

Menu 24.11 - Remote Management Control

TELNET Server:

Port = 23

Access = LAN only

 

Secured Client IP = 0.0.0.0

FTP Server:

Port = 21

Access = LAN only

 

Secured Client IP = 0.0.0.0

Web Server:

Port = 80

Access = LAN only

 

Secured Client IP = 0.0.0.0

SNMP Service:

Port = 161

Access = LAN only

 

Secured Client IP = 0.0.0.0

DNS Service:

Port = 53

Access = LAN only

 

Secured Client IP = 0.0.0.0

Press ENTER to Confirm or ESC to Cancel:

Figure 24-2 Menu 24.11 – Remote Management ControlTable 24-1 Menu 24.11 – Remote Management Control

FIELD

DESCRIPTION

EXAMPLE

 

 

 

Telnet Server

Each of these read-only labels denotes a service that you may use to

 

FTP Server

remotely manage the ZyWALL.

 

Web Server

 

 

SNMP Service

 

 

DNS Service

 

 

 

 

 

Server Port

This field shows the port number for the remote management service.

23

 

Except for DNS service, you may change the port number for a service

 

 

if needed, but you must use the same port number to use that service

 

 

for remote management.

 

Server Access

Select the access interface (if any) by pressing [SPACE BAR], then

LAN Only

 

[ENTER] to choose from: LAN only, WAN only, ALL or Disable.

(default)

Remote Management

24-3