ZyWALL 2 and ZyWALL 2WE
Table
FIELD | DESCRIPTION | EXAMPLE |
|
|
|
Secured Client | The default 0.0.0.0 allows any client to use this service to remotely | 0.0.0.0 |
IP | manage the ZyWALL. Enter an IP address to restrict access to a client |
|
| with a matching IP address. |
|
|
|
|
Once you have filled in this menu, press [ENTER] at the message "Press ENTER to Confirm or ESC to Cancel" to save your configuration, or press [ESC] to cancel.
24.7.1 Remote Management Limitations
Remote management over LAN or WAN will not work when:
1.A filter in menu 3.1 (LAN) or in menu 11.5 (WAN) is applied to block a Telnet, FTP or Web service.
2.You have disabled that service in menu 24.11.
3.The IP address in the Secured Client IP field (menu 24.11) does not match the client IP address. If it does not match, the ZyWALL will disconnect the session immediately.
4.There is an SMT console session running.
5.There is already another remote management session of the same type (web, FTP or Telnet) running. You may only have one remote management session of the same type running at one time.
6.There is a web remote management session running with a Telnet session. A Telnet session will be disconnected if you begin a web session; it will not begin if there already is a web session.
24.8 Remote Management and SUA/NAT
When SUA/NAT is enabled:
Use the ZyWALL’s WAN IP address when configuring from the WAN.
Use the ZyWALL’s LAN IP address when configuring from the LAN.
Remote Management |