ZyWALL 2 and ZyWALL 2WE

Table 10-3 Fields in Menu 11.1 (PPTP Encapsulation)

My IP Addr

Enter the IP address of the WAN Ethernet port.

10.0.0.140

 

 

 

My IP Mask

Enter the subnet mask of the WAN Ethernet port.

255.255.255.0

 

 

 

Server IP Addr

Enter the IP address of the ANT modem.

10.0.0.138

 

 

 

Connection

Enter the connection ID or connection name in the ANT. It must

N:My ISP

ID/Name

follow the “c:id” and “n:name” format.

 

 

This field is optional and depends on the requirements of your DSL

 

 

modem.

 

Schedules

You can apply up to four schedule sets here. For more details refer

 

 

to the Call Schedule Setup chapter.

 

Nailed-Up

Press [SPACE BAR] and then [ENTER] to select Yes if you want to

No

Connections

make the connection to this remote node a nailed-up connection.

 

 

 

 

10.4 Edit IP

Move the cursor to the Edit IP field in menu 11.1, then press [SPACE BAR] to select Yes. Press

[ENTER] to open Menu 11.3 - Network Layer Options.

Menu 11.3 - Remote Node Network Layer Options

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Addr= N/A

Network Address Translation= SUA Only

Metric= N/A

Private= N/A

RIP Direction= None

Version= N/A

Multicast= None

Enter here to CONFIRM or ESC to CANCEL:

Figure 10-5 Menu 11.3: Remote Node Network Layer Options for Ethernet Encapsulation This menu displays the My WAN Addr field for PPPoE and PPTP encapsulations and Gateway IP

Addr field for Ethernet encapsulation.

Remote Node Setup

10-7