Prestige 662H/HW Series User’s Guide
Figure 43 Advanced Modem Setup
The following table describes the fields in this screen.
Table 29 Advanced Modem Setup
LABEL | DESCRIPTION |
|
|
AT Command |
|
Strings |
|
Dial | Type the AT Command string to make a call. Example: atdt |
|
|
Drop | Type the AT Command string to drop a call. "~" represents a one second wait, for |
| example, "~~+++~~ath" can be used if your modem has a slow response time. |
Answer | Type the AT Command string to answer a call. Example: ata |
|
|
Drop DTR When | Select this check box to have the Prestige drop the DTR (Data Terminal Ready) |
Hang Up | signal after the "AT Command String: Drop" is sent out. |
AT Response |
|
Strings |
|
CLID | Type the keyword that precedes the CLID (Calling Line Identification) in the AT |
| response string. This lets the Prestige capture the CLID in the AT response string |
| that comes from the WAN device. CLID is required for CLID authentication. |
| Example: NMBR |
Called ID | Type the keyword preceding the dialed number. |
|
|
Speed | Type the keyword preceding the connection speed. Example: CONNECT |
|
|
Call Control |
|
|
|
Dial Timeout | Type a number of seconds for the Prestige to try to set up an outgoing call before |
| timing out (stopping). Example: 60 |
Retry Count | Type a number of times for the Prestige to retry a busy or |
| number before blacklisting the number. Example: 0 |
125 | Chapter 9 WAN Setup |