Prestige 662H/HW Series User’s Guide
Table 105 Menu 2.1Traffic Redirect Setup (continued)
FIELD | DESCRIPTION |
|
|
Metric | This field sets this route's priority among the routes the Prestige uses. |
| The metric represents the "cost of transmission". A router determines the best route |
| for transmission by choosing a path with the lowest "cost". RIP routing uses hop |
| count as the measurement of cost, with a minimum of "1" for directly connected |
| networks. The number must be between "1" and "15"; a number greater than "15" |
| means the link is down. The smaller the number, the lower the "cost" |
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm or ESC to Cancel:” to save your configuration, or press [ESC] at any time to cancel.
27.3Configuring Dial Backup Setup
1From the main menu, enter 2 to open menu 2. Then move the cursor to the Dial Backup field in
2Menu 2 - WAN Backup Setup, press the [SPACE BAR] to select Yes and then press
[ENTER].
Figure 153 Menu 2.2 Dial Backup Setup
Menu 2.2 - Dial Backup Setup
Active= No
Port Speed= 115200
AT Command String:
Init= at&fs0=0
Edit Advanced Setup= No
Press ENTER to Confirm or ESC to Cancel:
The following table describes the fields in this menu.
Table 106 Menu 2.2 Dial Backup Setup
FIELD | DESCRIPTION |
|
|
| |
|
|
Active | Use this field to turn the |
|
|
Port Speed | Press [SPACE BAR] and then press [ENTER] to select the speed of the connection |
| between the Dial Backup port and the external device. |
| Available speeds are:9600, 19200, 38400, 57600, 115200 or 230400 bps. |
|
|
AT Command |
|
String: |
|
Init | Enter the AT command string to initialize the WAN device. Consult the manual of your |
| WAN device connected to your Dial Backup port for specific AT commands. |
Chapter 27 Menu 2 WAN Backup Setup | 308 |