Prestige 662H/HW Series User’s Guide
Figure 154 Menu 2.2.1 Advanced Dial Backup Setup
Menu 2.2.1 - Advanced Dial Backup Setup
AT Command Strings: | Call Control: |
Dial= atd | Dial Timeout(sec)= 60 |
Drop= ~~+++~~ath | Retry Count= 0 |
Answer= ata | Retry Interval(sec)= N/A |
Drop DTR When Hang Up= No | Drop Timeout(sec)= 20 |
Call Back Delay(sec)= 15 | |
AT Response Strings: |
|
CLID= NMBR = |
|
Called Id= |
|
Speed= CONNECT
Press ENTER to Confirm or ESC to Cancel:
The following table describes fields in this menu.
Table 107 Menu 2.2.1 Advanced Dial Backup Setup: AT Commands Fields
FIELD | DESCRIPTION |
|
|
AT Command Strings: |
|
|
|
Dial | Enter the AT Command string to make a call. |
|
|
Drop | Enter the AT Command string to drop a call. "~” represents a one second wait, |
| e.g., "~~~+++~~ath" can be used if your modem has a slow response time. |
Answer | Enter the AT Command string to answer a call. |
|
|
Drop DTR When | Press the [SPACE BAR] to choose either Yes or No. When Yes is selected |
Hang Up | (the default), the DTR (Data Terminal Ready) signal is dropped after the "AT |
| Command String: Drop" is sent out. |
AT Response Strings: |
|
|
|
CLID (Calling Line | Enter the keyword that precedes the CLID (Calling Line Identification) in the AT |
Identification) | response string. This lets the Prestige capture the CLID in the AT response |
| string that comes from the WAN device. CLID is required for CLID |
| authentication. |
Called Id | Enter the keyword preceding the dialed number. |
|
|
Speed | Enter the keyword preceding the connection speed. |
|
|
Table 108 Menu 2.2.1 Advanced Dial Backup Setup: Call Control Parameters
FIELD | DESCRIPTION |
|
|
Call Control |
|
|
|
Dial Timeout (sec) | Enter a number of seconds for the Prestige to keep trying to set up an outgoing |
| call before timing out (stopping). The Prestige times out and stops if it cannot |
| set up an outgoing call within the timeout value. |
Retry Count | Enter a number of times for the Prestige to retry a busy or |
| number before blacklisting the number. |
Retry Interval (sec) | Enter a number of seconds for the Prestige to wait before trying another call |
| after a call has failed. This applies before a phone number is blacklisted. |
Chapter 27 Menu 2 WAN Backup Setup | 310 |