|
|
|
|
| Prestige 662H/HW Series User’s Guide | |
| Figure 280 Menu 27.1.1 IPSec Setup |
|
|
| ||
|
|
|
| |||
| Menu 27.1.1 – IPSec Setup |
|
| |||
| Index= 1 | Name= Taiwan |
|
| ||
| Active= Yes | Keep Alive= No | Nat Traversal= No |
| ||
| Local ID type= IP |
| Content: |
|
| |
| My IP Addr= 0.0.0.0 |
|
|
|
| |
| Peer ID type= IP |
| Content: |
|
| |
| Secure Gateway Address= zw50test.zyxel.com.tw |
| ||||
| Protocol= 0 | DNS Server= 0.0.0.0 |
|
| ||
| Local: | Addr Type= SINGLE |
|
|
| |
| IP Addr Start= 1.1.1.1 | End/Subnet Mask= N/A |
| |||
|
| Port Start= 0 |
| End= N/A |
| |
| Remote: | Addr Type= SUBNET |
|
|
| |
| IP Addr Start= 4.4.4.4 | End/Subnet Mask= 255.255.0.0 |
| |||
|
| Port Start= 0 |
| End= N/A |
| |
| Enable Replay Detection = No |
|
|
|
| |
| Key Management= IKE |
|
|
|
| |
| Edit Key Management Setup= No |
|
|
|
| |
| Press ENTER to Confirm or ESC to Cancel: |
| ||||
The following table describes the fields in this menu.
Table 150 Menu 27.1.1 IPSec Setup
FIELD | DESCRIPTION |
|
|
Index | This is the VPN rule index number you selected in the previous menu. |
|
|
Name | Enter a unique identification name for this VPN rule. The name may be up to 32 |
| characters long but only 10 characters will be displayed in Menu 27.1 - IPSec |
| Summary. |
Active | Press [SPACE BAR] to choose either Yes or No. Choose Yes and press [ENTER] to |
| activate the VPN tunnel. This field determines whether a VPN rule is applied before a |
| packet leaves the firewall. |
Keep Alive | Press [SPACE BAR] to choose either Yes or No. Choose Yes and press [ENTER] to |
| have the Prestige automatically |
| if there is no traffic. The remote IPSec router must also have keep alive enabled in |
| order for this feature to work. |
Chapter 45 VPN/IPSec Setup | 438 |