Prestige 662H/HW Series User’s Guide

Figure 282 Menu 27.1.1.2 Manual Setup

Menu 27.1.1.2 – Manual Setup

Active Protocol= ESP Tunnel

ESP Setup

SPI (Decimal)= 0

Encryption Algorithm= DES

Key1= ?

Key2= N/A

Key3= N/A

Authentication Algorithm= MD5

Key= ?

AH Setup

SPI (Decimal)= N/A

Authentication Algorithm= N/A

Key= N/A

Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this menu.

Table 153 Menu 27.1.1.2 Manual Setup

FIELD

DESCRIPTION

 

 

Active

Press [SPACE BAR] to choose from ESP Tunnel, ESP Transport, AH Tunnel or AH

Protocol

Transport and then press [ENTER]. Choosing an ESP combination causes the AH

 

Setup fields to be non-applicable (N/A)

ESP Setup

The ESP Setup fields are N/A if you chose an AH Active Protocol.

 

 

SPI (Decimal)

The SPI must be unique and from one to four integers ("0" to "9").

 

 

Encryption

Press [SPACE BAR] to choose from NULL, DES, 3DES or AES and then press

Algorithm

[ENTER]. Fill in the Key1 field below when you choose DES and fill in fields Key1 to

 

Key3 when you choose 3DES. Select NULL to set up a tunnel without encryption.

 

When you select NULL, you do not enter any encryption keys.

Key1

Enter a unique eight-character key. Any character may be used, including spaces, but

 

trailing spaces are truncated.

 

Fill in the Key1 field when you choose DES and fill in fields Key1 to Key3 when you

 

choose 3DES.

Key2

Enter a unique eight-character key. It can be comprised of any character including

 

spaces (but trailing spaces are truncated).

Key3

Enter a unique eight-character key. It can be comprised of any character including

 

spaces (but trailing spaces are truncated).

Authentication

Press [SPACE BAR] to choose from MD5 or SHA1 and then press [ENTER].

Algorithm

 

Key

Enter the authentication key to be used by IPSec if applicable. The key must be

 

unique. Enter 16 characters for MD5 authentication and 20 characters for SHA-1

 

authentication. Any character may be used, including spaces, but trailing spaces are

 

truncated.

AH Setup

The AH Setup fields are N/A if you chose an ESP Active Protocol.

 

 

SPI (Decimal)

The SPI must be from one to four unique decimal characters ("0" to "9") long.

 

 

Chapter 45 VPN/IPSec Setup

444