ZyXEL Communications 662H Series, 662HW Series Log Commands, Configuring What You Want the Prestige to Log

Prestige 662H/HW Series User’s Guide

Table 47 RFC-2408 ISAKMP Payload Types (continued)

LOG DISPLAY	PAYLOAD TYPE
SIG	Signature
NONCE	Nonce
NOTFY	Notification
DEL	Delete
VID	Vendor ID

Log Commands

Go to the command interpreter interface (Appendix N explains how to access and use the commands).

Configuring What You Want the Prestige to Log

1Use the sys logs load command to load the log setting buffer that allows you to configure which logs the Prestige is to record.

2Use sys logs category to view a list of the log categories.

Figure 41 Displaying Log Categories Example

Copyright (c) 1994 - 2004 ZyXEL Communications Corp. ras> ?

Valid commands are:		device	ether
sys	exit
wan	poe	aux	config
wlan	ip	ipsec	ppp
bridge	hdap	bm	lan
radius	8021x
ras>

3Use sys logs category followed by a log category to display the parameters that are available for the category.

Figure 42 Displaying Log Parameters Example

ras> sys logs category access

Usage: [0:none/1:log/2:alert/3:both] ras>

4Use sys logs category followed by a log category and a parameter to decide what to record.

Appendix S 552